Trucking “arms race” escalates as industry seeks heavier, longer trucks


Truck sizes and weights have largely been frozen at the federal level since 1993. Now the industry and a coalition of shipping interests are again testing the waters in Washington to see if now might be the time to take another look at that emotional and politically charged issue.

Recently a group of three bipartisan senators— Susan Collins, R-Maine, Mike Crapo, R-Idaho, and Herb Kohl, D-Wis.—introduced a bill called the “Safe and Efficient Transportation ACT (SETA) of 2010, S. 3705.

It would allow states to end run the federal size and weight rules—currently 80,000 pounds over five axles—and authorizes the operation of longer and heavier trucks. An identical bill, H.R. 1799, already has more than 50 co-sponsors in the House of Representatives.

与当前立法在Washingto日历n dwindling to less than 30 working days left before Congress recesses to go home and campaign for the mid-term elections, changes of passage in the current congressional term are slim.

But with the $500 billion federal-aid highway reauthorization bill likely to be taken up early next year, trucking interests say they are laying the groundwork for a major revision of truck size and weight laws early in the new Congress.

That push is just part of a larger strategy to modernize and expand freight productivity. Already, railroads are experimenting with longer trains—there was recently a record-setting, 3.4-milion train rolling through Southern California as part of a Union Pacific Corp. test to increase the lengths of its intermodal trains in that popular corridor.

In addition, a group of 19 Western governors backed a resolution passed by the Western Governors’ Association, to allow further use of longer combination vehicles (LCVs). Use of such trucks has been frozen since 1991 and only allowed on such roads where they were allowed prior to 1991.

Expanded use of double- and triple-trailers makes economic sense, with no compromise in safety, in the large expanses of the West, these governors said. In addition to these 19 governors, the move is backed by such large shippers as Kraft Foods, Coca-Cola and MillerCoors, among others.

A Federal Highway Administration study requested by the Western Governors’ Association found that a limited increase in the use of LCVs in 13 western states where LCVs are already allowed could reduce heavy truck vehicle miles traveled by 25 percent immediately, reduce fuel consumption and emissions by 12 percent, reduce highway noise by 10 percent and, perhaps most importantly, save shippers $2 billion a year.


But the Western Governors’ study found that these saving could be offset by higher transportation infrastructure and enforcement costs to states, and could have undesirable effects of shifting freight from rail to trucks. Finally, the study was unable to evaluate the impact of LCVs on safety because of inadequate data and monitoring systems.

But trucking industry officials say there already is plenty of data out there showing that LCVs, at least in the wide open expanses of the West, have an enviable safety record. Typically, they are driven by the most experienced and capable drivers available, and are not driven in risky, snowy weather.

The Western Governors are asking Congress to allow the Department of Transportation to consider proposals from interested western states to establish and operate pilot test programs to evaluate the benefits and costs of additional LCV routes, vehicle configurations and operating conditions

Already, as many as 44 states are doing a sort of “end run” around the 80,000-pound Interstate limit for trucks by allowing heavier trucks to operate on state roads. Trucking industry officials say expanding their use to Interstate and other federal-aid highways only makes sense.

“At the end of the day, 44 states are allowing heavier trucks to run on their state system of roads, but aren’t allowed on the best roads we have in this country,” says Randy Mullett, vice president of government relations and public congestion, sustainability, energy costs and the environment. All these issues favor expanded use of more productive trucks.”

Recently, Maine completed a safety pilot program allowing trucks exceeding the 80,000-pound weight restrictions and found no safety was compromised. Canada and Mexico routinely allow trucks as heavy as 97,000 pounds to operate in their nations. Under terms of the North American Free Trade Agreement (NAFTA), this country was supposed to be moving toward “harmonizing” truck size and weights throughout the continent, but this country has dragged its feet on that issue.

Truckers say the bottom line is this nation already is running billions of miles of triples in Western states with amazingly good safety records, and with no major compromises in safety.

“This is a really important topic for U.S. competitiveness internationally and to address this convergence of safety, energy, environmental and highway infrastructure concerns,” says Con-way’s Mullett.

The bill introduced by the three senators authorizes states to allow the operation of trucks on the Interstate Highway System with a gross weight of 97,000 pounds. Current law limits the weight of five-axle trucks traveling on the Interstate System to 80,000 pounds. The legislation requires that trucks operating above 80,000 pounds must add a sixth axle to compensate for the extra weight. The extra axle adds additional braking capacity, preventing an increase in stopping distances, and prevents pavements from sustaining more damage.

Advocates say operation of these vehicles will allow trucking companies to deliver the nation’s freight while making fewer trips. The result will be a reduction in the number of truck-involved crashes, less fuel use – and thus reduced emissions and carbon – and less congestion on our crowded highways. Fewer miles traveled also means less pavement damage, lowering highway maintenance costs. Any additional bridge costs will be covered by a higher federal fee that the vehicles authorized to operate under this legislation will be required to pay, and which will be dedicated to bridge investments in those states that authorize use of the heavier trucks.

美国货运Associ此举是支持的ations, which is supporting reform of federal truck size and weight regulations as part of its larger sustainability initiative.

“More efficient trucks, like those allowed under this legislation, will significantly reduce the trucking industry’s carbon output,” says ATA President and CEO Bill Graves. He added that U.S. truck weight limits are the lowest in the developed world, putting American businesses at a distinct disadvantage.


Article Topics

News
American Trucking Associations
Con-way
Freight
Herb Kohl
LCV
Mike Crapo
Susan Collins
Trucking
Trucks
All topics

Latest in Logistics

Maersk addresses flexibility and variability with innovation
Teamsters push UPS for ‘its last, best, and final offer’ by June 30
As Yellow and the Teamsters remain at odds, LTL market is left with a fair share of questions to answer
Delivering a performance edge to warehouses, distribution and fulfillment centers
SMC3 panel examines ways of managing and operating through risk-based events
Manufacturers are up against AI, workforce productivity and innovation speed challenges
Yellow is taking the Teamsters to court over breach of binding union contract
More Logistics

Subscribe to Logistics Management Magazine

Subscribe today!
Not a subscriber? Sign up today!
Subscribe today. It's FREE.
Find out what the world's most innovative companies are doing to improve productivity in their plants and distribution centers.
Start your FREE subscription today.

June 2023 万博2.0app下载

June 5, 2023 · To better manage through the constrained labor market, logistics operations are courting more women and other diverse job candidates; ramping up their training programs; investing in automation; and ensuring that positions offer the work-life balance that many new recruits are seeking.

Latest Resources

Optimize Your Seaport Selection Strategy Today
Drawing from our experience as the #1 container port in the State of Florida and one of the top auto import/export centers in the U.S., this 50-page guide will improve the way you approach port selection.
7 Steps to Maximize the Efficiency of Your Internal Logistics Operation
Future-Proof Your Supply Chain with Best of Breed Yard Management and Dock Scheduling
More resources

Latest Resources

Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Your Road Guide to Worry-Free Shipping Between the U.S. and Canada
Get expert guidance and best practices to help you navigate the cross-border shipping process with ease. Download our free white paper today!
Warehouse/DC Automation & Technology: It’s “go time” for investment
Warehouse/DC Automation & Technology: It’s “go time” for investment
In our latest Special Digital Issue, Logistics Management has curated several feature stories that neatly encapsulate the rise of automated systems and...

Why accurate, real-time location data is a must for efficient operations
Why accurate, real-time location data is a must for efficient operations
Find out how next-generation workforce management apps use accurate, real-time location data to power successful operations in this webinar with Radar CEO...
Should you lease or buy your lift truck fleet?
Should you lease or buy your lift truck fleet?
Leasing critical equipment like lift trucks can offer flexibility, but some lease terms can be complex and costly if you’re not...
2023 State of the Third-Party Logistics (3PL) Industry Report
2023 State of the Third-Party Logistics (3PL) Industry Report
In this year’s Third-Party Logistics State of the Industry Report, you’ll learn about our top trends for the year and...